In the IoT Server Configuration application, you can assign a static route to a specific network card through the Routes configuration section, found on the left-side menu.
To create a new route, there are two scenarios:
- If no routes are configured, find the Create a new route configuration button in the center of the screen.
- If routes are already in place, this button is located at the bottom right.
This action opens an editable form where you can input the route's details:
Enter the following information:
- Name: Assign a descriptive name to the route. This is a free text field.
- Network range: Specify the target network, using an IP address and network mask (e.g., 10.0.0.0/24).
- Destination: Input the router's IP address that provides access to the target network.
- Interface: Choose the network interface for this route. Select All to auto-select the appropriate interface.
After filling out the form, click the Create button to save and apply the new configuration. A green notification message will confirm the successful setup.
For editing an existing route, simply click the pencil icon next to the route you wish to modify.
A right side drawer displays the current configuration you can edit in the different input field (1) and save by clicking on the Edit (2) button. A green toaster message confirms the modifications.
To delete a route, click the trash icon next to the route you intend to remove.
A confirmation pop-up will appear. Click Confirm to proceed with the deletion or Cancel to abort.
